Home > Suspension & Chassis > VW / Audi / SEAT / Skoda > Coilover & Lowering Kits > MK1 Caddy
(Details shown apply to the default selection)
Brand: Just Caddys
Delivery: No charge
In stock, immediate despatch
These kits are bespoke to the Caddy and offer an axle offset if required.
It is recommended that the offset is used on the MK1 to keep the wheels central within the wheel arches.
This offset also helps prevent rubbing on the leading edge of the arch, as well as looking right!
Can be used with or without our offset spring saddles
Can be used to offset an axle if offset saddles have not been used
Machined from 6082/T6 billet aluminium
Available in three sizes, 1", 1.5" & 2"
Blocks sold in pairs, and U-bolts in sets of 4 (if required)
These blocks will only work to lower your Caddy further after the axle has been relocated on top of the leaf springs (axle flip). If you fit these to a standard Caddy then you will RAISE the height not lower it!
If you do not have extended U-bolts already, you will need them for these to work!
The locating bolt will need turning down slightly (or the hole in saddle drilling out to 16.5mm) to use with original or older specification saddles
VW MK2 Caddy / Inca Van Front only T/A Technix Coilovers£165.00
MK1 Caddy Modified Axle Exchange Service (Axle Flip)£100.00 - £160.00
This is a modification service, once ordered and paid for we will contact you with a delivery address that you will need to post your axle to. once we have welded on new saddles (and brake compensator bracket if applicable)
This is a UK service ONLY
VW MK1 Caddy Pickup "Short" Rear Gas Shock Absorbers Dampers (Axle Flip)£79.95
Shorterned dampers to match a "flipped" axle
VW Caddy MK1 Axle Flip Offset Spring Saddles & Brake Compensator Bracket£35.00
Axle Flip Weld-On Spring Saddles
VW Caddy MK1 Axle Flip Offset Spring Saddles£27.50
VW Caddy MK1 Axle Extended U-Bolts£24.50
For use on there own as replacemnts or you use with lowering blocks