Home > Suspension & Chassis > VW / Audi / SEAT / Skoda > Coilover & Lowering Kits > MK3 Caddy (2K)
(Details shown apply to the default selection)
Delivery: No charge
In stock, immediate despatch
Please Note: You will need to measure your wheel bearing housing where the strut slots into it before placing an order, the diameter will either be 50 or 55mm. Please make sure you order the correct size.
MK3 Caddy (2K) Coilover KitThe kit will give you maximum flexibility when setting up the perfect ride height for your van.Produced to the highest quality standards with a sporty well balanced spring-damping characteristics.
When ordering please select carefully from the list below for the correct kit for your vehicle, you will also need to know your strut diameter where it fits into the wheel bearing housing (upright), this will be either 50 or 55mm. If you are unsure of the kit required for your vehicle then please contact us with your Caddy's details.
60VW20/50 - 1.6/2.0/2.0SDi/1.9TDi exc DSG/4-Motion (Ø 50mm!!) 60VW20/55 - 1.6/2.0/2.0SDi/1.9TDi exc DSG/4-Motion (Ø 55mm!!) 60VW21/50 - 1.9TDi DSG/2.0TDi/DSG exc 4-Motion (Ø 50mm!!) 60VW21/55 - 1.9TDi DSG/2.0TDi/DSG exc 4-Motion (Ø 55mm!!)60VW22/50 - Maxi/Life 1.4/1.6/2.0/2.0SDi/1.9TDi exc DSG/4-Motion (Ø 50mm!!) 60VW22/55 - Maxi/Life 1.4/1.6/2.0/2.0SDi/1.9TDi exc DSG/4-Motion (Ø 55mm!!) 60VW23/50 - Maxi/Life 1.9TDi DSG/2.0TDi/DSG exc l4-Motion (Ø 50mm!!) 60VW23/55 - Maxi/Life 1.9TDi DSG/2.0TDi/DSG exc 4-Motion (Ø 55mm!!)
All kits will lower your Caddy:
Front - 50-90mm
SWB Rear - 50-80mm
Maxi Rear - 60-80mm
The kit includes all the following parts:Front CoiloversAdjusting SpannerRear Axle Relocation BracketsRear Leaf Spring Adjustable ShacklesRear Dampers (Shock Absorbers)
PLEASE NOTE: The kits offered on this page are only adjustable for ride height. If you require adjustable damping also then please see the "XXtreme" kits elsewhere in the shop
Customers who bought this item also bought: