Home > Suspension & Chassis > VW / Audi / SEAT / Skoda > Coilover & Lowering Kits > MK3 Caddy (2K)
(Details shown apply to the default selection)
Delivery: No charge
No stock, delayed despatch
Please Note: You will need to measure your wheel bearing housing where the strut slots into it before placing an order, the diameter will either be 50 or 55mm. Please make sure you order the correct size.
MK3 Caddy (2K) Front CoiloversThe kit will give you maximum flexibility when setting up the perfect ride height for the front of your van.Produced to the highest quality standards with a sporty well balanced spring-damping characteristics.
When ordering please select carefully from the list below for the correct kit for your vehicle, you will also need to know your strut diameter where it fits into the wheel bearing housing (upright), this will be either 50 or 55mm. If you are unsure of the kit required for your vehicle then please contact us with your Caddy's details.
Will lower the front of your Caddy:
Includes all the following parts:Front CoiloversAdjusting Spanner
VW MK3 (2k) Caddy Van V-Maxx Shortened Rear Dampers£99.50