Home > Engine & Gearbox > Engine & Gearbox Mounts > MK1 Golf / Scirocco / Caddy
Similar in design to what we have been using on our VR6 Turbo MK1 for many years
If you are running big power or lots of torque then the front panel on the MK1's start to crack & break up around the front mounting point due to fatigue.
These 6mm reinforcement cross members are sandwiched between the front panel and front engine mount, they are then also tied into the chassis legs at the bumper mounting points
Supplied in raw steel form
Suitable for all MK1 chassis's
American Built Rabbit A1's
Perfect for 1.8t, G60, 16v & TDI swaps etc....
VW MK1 Golf 02A & 02J Heavy Duty Front Engine Mount 1.8T G60 16v£110.00
VW MK1 Golf Caddy Scirocco 02A 02J Conversion Speedo Cable£19.95